Microchip firm Proteus ISIS will use the simulator to simulate the arduino program supports a variety of microcontrollers.To do this, let’s get the first Arduino Proteus simulator library from the link below.
Library >> arduino-Proteus-lib
Downloaded Library file Check the location:
using Proteus 7; C: \ Program Files \ Labcenter Electronics \ Proteus 7 Professional \ LIBRARY
using Proteus 8; C: \ ProgramData \ Labcenter Electronics \ Proteus 8 Professional \ LIBRARY or C: \ Program Files \ Labcenter Electronics \ Proteus 8 Professional \ LIBRARY
We open the Proteus program.Components of the screen (on the keyboard “P” button on the screen is the component will appear on the pressure) You can select the types of arduino arduino section.Let’s make our first app.
We put out a lit LEDs in our sample application.The display of components for our arduino, Ledisi and our resilience our add.Let’s make connections as follows.
We could cross section after loading, the program established our circuit. Simulation studies for the “.hex” We need to file. To do this, we open the arduino programs. File >> prefences section of the compilation and we mark the upload box.
We are opening the blink of an Arduino application practices are part and we press the verify button.When finished, the process of compiling our code section “.hex” We are copying the location of the file.
Finally, copy the code we will send arduino either. We double click on the Arduino. We are sticking to the program the file location of the file opened on the screen.
So he flashed LEDs with arduino using the simulation program. You can use many other applications of simulation.